AGA propane leak finder
Ensure the safety of your gas equipment
With AGA leak finder, you can easily and quickly ensure that your gas equipment is safe to use. The leak finder quickly and reliably detects any gas leaks – if bubbles form on the surface where the leak finder is sprayed, there is a gas leak.
It is good to check the hoses and connections on propane grills, stoves, refrigerators and outdoor heaters on a regular basis, like every time you change a cylinder or at least once a year, for example, in the spring after winter storage.
AGA propane leak finder benefits
- Easy way to ensure the safety of your gas equipment
- Water-based product does not damage surfaces or environment
- Suitable for other gases too
AGA propane leak finder is water-based and will not damage equipment surfaces or hoses, or the environment. It will also not damage metals or plastics.
When using AGA propane leak finder,
-
- Always shake the canister before use.
-
- Turn on the gas flow by opening the valve of the gas cylinder.
-
- Thoroughly spray an even coating of the product over the joints, hoses, pipes and seals.
-
- If gas is leaking, bubbles will form where there is a leak.
-
- Repair any detected leaks before using the equipment.
-
- Do not use the leak finder on equipment which is powered on.
-
- If you use the product on plastic or copper surfaces, or on oxygen equipment, rinse off any leftover product with water.
AGA propane leak finder can be used for
- Propane
- Natural gas
- Butane
- Acetylene
- Nitrogen
- Carbon dioxide
- Compressed air
- Refrigerants
- Oxygen
- Other gas types
- AGA propane leak finder meets the requirements of MIL-L-25567 of oxygen compatibility.
- Testing of oxygen systems must be done carefully, and product residues should not be allowed to build up.
- Aerosols are equipped with the 360° (upside-down) spray valve and handy large button.
- Aerosols are pressurised with neutral N2O propellant, giving an active product content of over 98%.
| Appearance | colorless liquid |
| Specific gravity | @ 20°C 1,00 ± 0,01 |
| Flash point | not flammable |
| Boiling point | 100°C |
| Freezing point | 0°C (*) |
| pH | 6 – 8 |
| Surface tension | @ 20°C 27 mN/m |
| Foam stability | (DIN 53902) 85% |
| Corrosion test | (DIN 30657) not corrosive |
| Bottle size | 250 ml |
| Bottle weight | 285 g |
| Bottle height | 20,5 cm |